Test Name

1. Sampling of Soil and Aggregate
2. Sampling of Aggregate
3. Preparing and Testing Specimens from Shotcrete Test Panels

Test Name

1. Moisture Content
2. Liquid Limit
3. Plastic Limit
4. Plasticity Index
5. Wet Sieve Analysis
6. Dry Sieve Analysis
7. Particle Density
8. Determination of Linear Shrinkage
9. Hydrometer Testing for Particle Size Distribution
10. Dry Density/Moisture Content Relationshi
11. In-situ Density Test by Sand Replacement Method
12. California Bearing Ratio (Soaked)
13. California Bearing Ratio (Un-soaked)
14. Determination of Shear Strength by Direct Shear (Small Shear Box apparatus)
15. Loose bulk density of soil
16. Bulk density of soil
17. Maximum density of soil
18. Minimum Density of soil
19. Laboratory Compaction

Test Name

      1.  Sieve Analysis (Wet)

      2. Sieve Analysis (Dry)

      3.  Relative Density and Water Absorption of Coarse Aggregate

      4.  Relative Density and Water Absorption of Fine Aggregate

      5.  Ten Percent Fines Value of Aggregate (Dry)

      6.  Ten Percent Fines Value of Aggregate (Soaked)

      7.  Materials Finer than 75 um (No 200) Sieve in Aggregate by Washing

      8.  Sieve Analysis of Fine and Coarse Aggregate

      9.  Mass Loss on Ignition of Light-Weight Aggregate

     10.  Bulk Density of Light Weight Aggregate

     11.  Bulk Density of Aggregate

     12.  Determination of Moisture Content in Aggregate

     13.  Unit Weight and Voids in Aggregate

     14.  Light Weight Pieces in Aggregate

     15.  Drying Shrinkage of Aggregate

     16.  Compaction Factor Value

     17.  Partially Crushed faces of Aggregate

     18.  Fully Crushed faces of Aggregate

     19.  Loose Bulk Density

    20.  Aggregate Impact Value

    21.  Moisture Content of Aggregate by Drying